A belay device for all types of ropes. The AIR FORCE 2 belay device can be used with single, double or twin ropes of diameters between 7 and 10mm. The 2 V-grooves run smoothly enough to pay our slack easily,...

Compatible with all rope types, the Air Force 3 allows the leader, when at the stance, to individually belay and lock off one or two seconds. The small insert hole allows the rope to be released even when under tension....

Very lightweight belay device based on the tube principle; suitable for double, half and single ropes from 7.5 to 10.5 mm in diameter. The V-shaped grooves permit controlled retention of drops even at low manual force as well as controlled...

Innovative versatile belay and rappel device Autoblock mode for belaying the follower from anchor point Innovative lowering in autoblock mode – no release hole needed Optimized cavity shape keeps sharp edges from forming even after long-term use Weight 68 g Color...

Figure-eight descender For descending on single or half ropes. Description Square shape to reduce rope twist and girth hitch formation High-strength forged aluminum Small hole can be used with thin ropes if necessary, or as a belay plate Specifications Material(s):...

Figure-eight descender with anti-burn tab Anodized version on the HUIT with anti-burn tab for holding the device when it is hot from a long or rapid descent. Description Square shape to reduce rope twist and girth hitch formation High-strength forged...

Ultralight belay and rappel device Hurry is an ultralight belay/rappel device that enables you to belay with single rope as well as with double. It offers two friction modes. Hurry is one of the essential tools any rock climber must...

CE certified   This extremely compact and lightweight ascender is very rope-friendly because it has no teeth or cam. It operates by pivoting the rope around a lever when weighted. Simply open the rotating side plate, insert the rope and...

Light and compact belay/rappel device. Master was created for belaying and rappelling. It is a versatile, dynamic and reliable tool to minimize the force transmitted to the anchors, the belay and the wear and tear over time of the rope....

Versatile belay / rappel device, that can also be used in guide mode. Master Pro was created for belaying and rappelling. It is a versatile, dynamic and reliable tool to minimize the force transmitted to the anchors, the belay and...

Versatile, lightweight belay/rappel device, for use with one or two rope strands and ability to belay a second climber from the anchor Known for being versatile and lightweight, REVERSO is a belay device for single or multi-pitch climbing and mountaineering....

Intuitive belay device with reliable blocking of the climbing rope. The first generation of the Smart belay device was successfully launched in 2009. Built on the experience the new Smart 2.0 offers significantly improved braking effectiveness as well as optimized...

Light and compact ascender For ropes from 8 to 13 mm A hyperlight, compact ascender with an ergonomic design that makes it very easy to use. The toothed cam is finished with a special anti-wear treatment and features drain holes...

Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes Super smooth action and increased safety on traversing maneuvers Thicker body plates and a shaped connection point reduce shifting between the device and the connector...

Compact, lightweight belay/rappel device, for use with one or two rope strands and for rappelling The lightest in the Petzl range! VERSO is an easy-to-use belay device. With it, you can belay a climber or rappel. The specific design allows...